Epson CO-W01 - Projector Feature Settings - Settings Menu

92
Setting Options Description
HDMI EQ Setting — Adjusts the signal level of the
HDMI input. Change the setting if
there is interference with the
signal or if there is no image.
Note: If there is no image when
using a media streaming device,
select 1 as the setting value.
Reset Image — Resets all Image menu settings
to their defaults
Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness, adjust
the Light Output setting.
Parent topic: Adjusting the Menu Settings
Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
Setting Options Description
Volume — Adjusts the volume of the
projector's speaker