Epson CO-W01 - Creating a User Pattern to Display

83
3. A prompt appears asking if you want to use the displayed image as the user's logo. Select Yes, then
confirm your choice.
You see a completion message.
4. Press return to select when you want to display the User's Logo screen:
• To display it whenever there is no input signal, select Display Background and set it to Logo.
• To display it whenever you turn the projector on, select Startup Screen and set it to On.
• To display it whenever you press the A/V Mute button, select A/V Mute and set it to Logo.
To prevent anyone from changing the User's Logo settings without first entering a password, set a
password and enable User's Logo security.
Parent topic: Password Security Types
Related references
Projector Feature Settings - Settings Menu
Related tasks
Selecting Password Security Types
Setting a Password
Creating a User Pattern to Display
You can transfer an image to the projector and then display it as a pattern to aid in presentations when
you use the Pattern Display feature. This transferred image is called the User Pattern.
Note: Once you save a user pattern, you cannot restore the default pattern. You cannot save an image
that is protected by HDCP. If a pattern is displayed for a long time, a residual image may be visible in
projected images.
1. Display the image you want to project as the User Pattern from a connected computer or video
source.
2. Press the menu button and select the Settings > Installation > Pattern > User Pattern setting.
You see a prompt asking if you want to use the displayed image as a User Pattern.
Note: When you select User Pattern, adjustments such as Keystone, Zoom, or Aspect are
temporarily canceled.
3. Select Yes and then confirm your choice.