63
5. Select the Quick Corner setting and press Enter.
Note: You may see a confirmation screen. Select Yes and press Enter again.
Note: You can also press the keystone button on the remote control to display the Keystone
adjustment screen.
You see the Quick Corner adjustment screen:
6. Use the arrow buttons on the remote control to select the corner of the image you want to adjust.
Then press Enter.
Note: To reset your adjustments, press and hold the return button for at least 2 seconds to
display a reset screen. Then select Yes.
7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area
selection screen.
Note: If one of the directional arrows on the screen turns gray, you cannot adjust the shape any
further in that direction.
8. When you are finished, press the return button.
Parent topic: Image Shape
To Next Page
Loading...
