This chapter explains the additional functions for networks.
Projecting with "Connect to a Network Projector"
Connect to a Network Projector is a standard function in Windows Vista
and Windows 7. You can project images from the computer by detecting
the projector on the network only by using a function of the OS without
having to install any special software.
Compatible OS
Windows Vista: Home Premium/Business/Enterprise/Ultimate
Windows 7: Professional/Ultimate
This section provides an easy explanation of "Connect to a Network
Projector".
Check that the projector and computer are connected to the network, and
carry out the following operations.
a
Turn on the projector, and then press the [LAN] button on the
remote control.
The input source will change to LAN.
s "Switching to the Target Image by Remote Control" p.35
b
Start the computer, and then click Start - All Programs -
Accessories - Connect to a Network Projector.
The connection setting screen is displayed.
The projector is identified by inputting its IP address, or by allowing
the OS to automatically identify all of the connected projectors.
c
Once the OS has identified all of the connected projectors, select
the one that you want to use and click Connect.
When the projector password screen is displayed, enter the keyword
shown at the bottom of the LAN standby screen.
a
• You can connect only one projector to a computer.
• When using Network Projector from Options in Windows Meeting
Space, set the colors for the computer screen you are using to the
highest level (32bit). If it is not capable of a 32bit display, a message
is displayed and you cannot connect.
Network Functions
71
To Next Page
Loading...
Need help?
General
