cannot verify reliability from a Web browser, a warning about the server's
reliability is generated when the projector is accessed from a Web browser.
Although the security level is decreased when compared to a server
certificate, you can continue to communicate by ignoring the warning.
List of supported certificates
Client Certificate (PEAP-TLS/EAP-TLS)
Item Explanation
Supported format PKCS#12
Extension PKCS, P12
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Password Required. Up to 32 alphanumeric characters
Server Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-Fast)
Item Explanation
Supported format X509v3
Extension DER/CER/PEM
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Encode BASE64/Binary
Web Server Certificate (Secure HTTP)
Item Explanation
Supported format PKCS#12
Extension PKCS, P12
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Common Name Network host name
Organization Optional
Password Required. Up to 32 alphanumeric characters
Using the Mail Notification Function to Report
Problems
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
s Network - Administrator Settings - Mail Notification p.105
a
• Up to a maximum of three notification destinations (addresses) can
be registered, and notification messages can be sent to all three
destinations at once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
s Extended - Standby Mode p.95
Monitoring and Controlling
78
To Next Page
Loading...
Need help?
General
