D
User Password
Select the Enabled check box to require a password to open the operation window
on the computer.
The following items can be set.
Item Function
New Password Enter the new password when changing the password to
open the operation window. (The name can contain up
to 26 single-byte alphanumeric characters.)
Confirm Enter the same password as you entered in New
Password. If the passwords are not the same, an error is
displayed.
Send Click this button to confirm the changes made to the
User Password.
Setting Schedule
You can schedule turning the projector power on/off and switching the
input source, as events in the schedule. Registered events are executed
automatically at the specified time on the specified dates or weekly.
Warning
Do not place flammable objects in front of the lens. If you set the schedule to
turn on the projector automatically, any flammable objects placed in front of
the lens could cause a fire.
Setting Methods
a
Press the [Menu] button while projecting.
s
"Using the Configuration Menu" p.88
Using the remote control Using the control panel
b
Select Time/Schedule Settings from Extended.
c
Set the time and schedule.
Selecting from the top menu and sub menus, and changing of
selected items are the same as operations in the configuration menu.
Monitoring and Controlling
85
To Next Page
Loading...
Need help?
General
