Installing the Wall Mount
67
d
Attach the cable cover to the projector, and then secure it with the screws (x2)
Attaching a Security Cable
Perform one of the following security measures if necessary.
•
Install a commercially available theft-prevention wire lock
Pass the wire lock through the security cable installation points on the projector and the setting plate.
•
Install a security wire from Kensington
The security slot on this product is compatible with the Microsaver Security System manufactured by Kensington.
See the following for more details on the Microsaver Security System.
http://www.kensington.com/
To Next Page
Loading...
