Image files from a digital camera and image files stored on a
USB
storage device can be projected using Slideshow by either of the
following two methods.
• Projecting selected image files
This is a function for projecting single files.
• Projecting all image files in a folder in sequence (Slideshow)
This is a function for projecting the file contents of a folder in
order, one file at a time.
Attention
Do not disconnect the USB storage device while it is being accessed.
Slideshow may not operate correctly.
You can perform the following operations on the remote control or the
Control panel.
Projecting Images
Procedure
A
Start Slideshow. s p.49
The content of the connected digital camera or USB storage
device is displayed.
B
Position the cursor on the image file you want to project
and press the [
], [ ], [ ], or [ ] buttons or the
[
w], [v], [a], or [b] buttons on the Control panel.
A
Image file
C
Press [Enter].
The image starts to play back.
Projecting Image Files
52
To Next Page
Loading...
