Check Remedy
Are the access point and the projector's subnet different?
Select Manual search from EMP NS Connection, specify the IP address, and connect.
s p.33
The Slide show cannot be displayed on the desired display when the multi-screen display function is being executed.
Check Remedy
Are you using PowerPoint 2002 or an earlier version?
For Windows
To set and use two or more virtual displays
g
, use PowerPoint 2003 or later, or limit the number of virtual
displays to one before displaying the Slide show.
Applications are no longer displayed from the computer screen when the multi-screen display function is executed.
Check Remedy
Is another application running on the
virtual display
g
?
For Windows
When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In this case,
set EPSON Virtual Display to "Off" at "Screen properties".
The mouse cursor is not displayed on the computer screen.
Check Remedy
Is EPSON Virtual Display installed?
For Windows
The mouse cursor was moved onto the virtual display
g
. When the virtual display checkbox is cleared on the
Add-Remove EPSON Virtual Display screen, the mouse pointer returns to the screen display area.
When connecting with EMP NS Connection the image is not displayed or the image is slow to appear.
Check Remedy
Did you try to play back movies with Media Player or try to
operate the screen saver preview?
Depending on the computer, the movie playback screen in Media Player may not be displayed, and the screen
saver preview may not be displayed normally.
Is WEP encryption enabled, or are multiple projectors connected? The display speed decreases when WEP encryption is effective or multiple projectors are connected.
Have you enabled DHCP? When DHCP is set to On in Advanced Connection Mode or Wired LAN connection, if an available DHCP server
is not found, it takes time to enter LAN standby status.
Troubleshooting
61
To Next Page
Loading...
Need help?
General
