Epson EB-826W - Page 63

Error Messages Remedy
EMP NS Connection initialization failed. Restart EMP NS Connection. If the message still appears, uninstall and then reinstall EMP NS Connection.
s p.8
Connection failed due to keyword mismatch. When connecting to a projector for which a Projector keyword has been set, the wrong Projector keyword is entered.
Check the Projector keyword that is displayed on the projector's connection standby screen. After the connection
is cut off and then reconnected, enter the Projector keyword on the keyword entry screen that is displayed.
s p.14
Network adapter information could not be obtained. Check the following point.
Is a network adapter installed on the computer?
Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the following.
Check the network settings on the computer and the network settings on the projector.
For details on the network settings to be made on the projector, see
s
User's Guide "Network Menu (EB-826W/
825/85/84 only)"
One or more connected projectors do not support resolutions
greater than SXGA. Reduce the screen resolution and reconnect.
There is an ELP-735 projector in the connection destination. Change the computer screen resolution to SXGA
(
1280x1024
) or less.
One or more projectors are not responding. You cannot connect to multiple projectors simultaneously. Check the network settings on the computer and the
network settings on the projector.
For details on the network settings to be made on the projector, see s User's Guide "Network Menu (EB-826W/
825/85/84 only)"
Enter the keyword displayed on the projector screen.
Check the Projector keyword displayed on the LAN standby screen, and enter the Projector keyword.
Cannot start this application while EPSON USB Display is
running.
Close USB Display and then start EMP NS Connection.
Cannot start this application while Quick Wireless Connection is
running.
Close Quick Wireless Connection and then start EMP NS Connection.
Cannot connect to the projector using this version of EMP NS
Connection. Install the latest version of EMP NS Connection.
Install the latest version of EMP NS Connection.
Troubleshooting
63