Epson EB-L260F User Manual

233
Setting Options Description
Light Source Calibration (EB-
L260F/EB-L265F)
Run Now
Run Periodically
Last Run
Selects options to perform light
source calibration to maintain the
color balance of the projected
image
Run Now: Select On to start light
source calibration now. Make
sure the projector has been
turned on for at least 30 minutes
for maximum accuracy. You may
not be able to start calibration if
the projector's environmental
temperature is out of range.
Run Periodically: Select On to
perform calibration every 100
hours of usage
Last Run: Displays the date and
time light source calibration was
last performed
Date & Time Date & Time
Daylight Saving Time
Internet Time
Adjusts the projector's date and
time settings
• Date & Time: sets the date
and time on the projector
• Daylight Saving Time:
enables daylight saving time
• Internet Time: updates the
time automatically via an
online time server
Schedule Settings — Schedules projector events to
occur automatically at selected
dates and times
Wireless LAN Power On
Off
Enables or disables wireless
communication

Epson EB-L260F Specifications

General

Heat dissipation	884 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:9
Vertical scan range	192 - 240 Hz
Projection technology	3LCD
Contrast ratio (typical)	2500000:1
Screen size compatibility	31 - 310 \
Projection distance (wide)	0.9 - 9.1 m
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	30 °
Projector brightness (economic mode)	3200 ANSI lumens
Light source type	Laser
Service life of light source	20000 h
Service life of light source (economic mode)	30000 h
Offset	1000 %
Throw ratio	1.32 - 2.12:1
Zoom capability	Yes
Focal length range	18.2 - 29.1 mm
Aperture range (F-F)	1.51 - 1.77
Serial interface type	RS-232C
USB 2.0 ports quantity	2
VGA (D-Sub) ports quantity	3
USB 2.0 Type-A ports quantity	1
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Noise level	37 dB
Projection modes	Ceiling, Front
Noise level (economic mode)	27 dB
Placement	Ceiling, Desktop, Floor, Wall
Product type	Standard throw projector
Product color	White
Cable lock slot type	Kensington
Video color modes	Blackboard, DICOM simulation mode, Dynamic, Multi-projection, Presentation, sRGB
RMS rated power	16 W
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	260 W
Power consumption (standby)	0.5 W
Power consumption (typical)	199 W
Power consumption (economy mode)	144 W
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Cables included	HDMI, Power
Bundled software	Epson Creative Projection, EasyMP Multi PC Projection, Epson Projector Content Manager, Epson Projector Management
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	299 mm
Width	325 mm
Height	90 mm
Weight	4200 g