Epson EB-X9 User Manual

Connecting for the first time
When connecting for the first time, you need to install the driver. The
installation procedure differs for Windows and Mac OS.
Procedure
For Windows
A Driver installation starts automatically.
When you are using a Windows 2000 computer, double-click My
Computer - EPSON_PJ_UD - EMP_UDSE.EXE, on your computer.
When using a computer running Windows 2000 under user
authority, a Windows error message is displayed during installation
and you may not be able to install the software. In this case, try
updating Windows to the latest version, restart, and then try to
connect again.
For more details, contact the nearest address provided in the Support
and Service Guide.
s Epson Projector Contact List
B Click "Agree".
If the driver is not installed, you cannot start USB Display. Select
Agree to install the driver. If you want to cancel installation, click
Disagree.
C Computer images are projected.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
D When you are finished, disconnect the USB cable.
The projector can be disconnected simply by disconnecting the USB
cable. There is no need to use the Safely Remove Hardware feature
in Windows.
Connecting with a USB cable and Projecting (USB Display)
20

Epson EB-X9 Specifications

General

Matrix size	0.55 \
Projection distance	1.8 - 2.4 m
Projection technology	LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	30 °
Audio input	1 x RCA
Aspect ratio	4:3
RS-232 ports	0
Dimensions (WxDxH)	295 x 228 x 77 mm
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	5000 h
Analog signal format system	-
RMS rated power	1 W
Number of built-in speakers	1
DVI port	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)	0.4 W
Power consumption (typical)	265 W
Noise level	37 dB
Country of origin	China
Pallet width	800 mm
Pallet height	2230 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	78 pc(s)
Quantity per pallet layer	6 pc(s)

Weight and Dimensions

Weight	2300 g
Package depth	360 mm
Package width	340 mm
Package height	160 mm
Package weight	4060 g