Projecting Image Files
The Slideshow offers you two ways to project image files contained in a
USB storage device or a digital camera.
• Projecting the selected single image file
This function projects the single image file you selected.
• Sequentially projecting image files in a folder (Slideshow)
This function sequentially plays back image files (runs a slideshow) in the
selected folder.
s
p.45
Attention
Do not disconnect the USB storage device while it is being accessed.Slideshow
may not operate correctly.
Although the following steps are explained based on the Remote Control,
you can perform the same operations from the projector's Control panel.
Projecting an image
Procedure
A
Start a Slideshow. s p.42
The file list screen appears.
B
Press the [ ], [ ], [ ] and [ ] buttons to set the
cursor on the image file you want to project.
A
Image file
C
Press the [Enter] button.
The image is projected.
Making a Presentation with a Slideshow (EB-W10/X10 only)
44
To Next Page
Loading...
Need help?
General
Weight and Dimensions
