The projector has the following enhanced security functions.
• Password Protect
You can limit who can use the projector.
• Control Panel Lock
You can prevent people changing the settings on the projector without
permission.
s p.39
• Anti-Theft Lock
The projector is equipped with various types of anti-theft security devices.
s p.40
Managing Users (Password Protect)
When Password Protect is activated, people who do not know the Password
cannot use the projector to project images even if the projector power is on.
Furthermore, the user's logo that is displayed when you turn on the
projector cannot be changed. This acts as an anti-theft device as the
projector cannot be used even if it is stolen. At the time of purchase,
Password Protect is not activated.
Type of Password Protect
The following two kinds of Password Protect settings can be made
according to how the projector is being used.
1. Power On Protect
When Power On Protect is On, you need to enter a preset Password after the
projector is plugged in and turned on (this also applies to Direct Power On). If the
correct Password is not entered, projection does not start.
2. User's Logo Protect
Even if someone tries to change the User's Logo set by the owner of the projector, it
cannot be changed. When User's Logo Protect is set to On, the following setting
changes for the User's Logo are prohibited.
• Capturing a User's Logo
• Settings for Display Background, Startup Screen, and A/V Mute
from Display in the Configuration Menu.
Setting Password Protect
Use the following procedure to set Password Protect.
Procedure
A
During projection, hold down the [Freeze] button for about
five seconds.
The Password Protect setting menu is displayed.
Remote Control
Security Functions
37
To Next Page
Loading...
Need help?
General
Weight and Dimensions
