EasyManuals Logo

Epson EB-X9 User Manual

Epson EB-X9
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Attention
If an incorrect password is entered three times in succession, the message "The
projector's operation will be locked." is displayed for about five minutes, and
then the projector switches to standby mode. If this happens, disconnect the
power plug from the electrical outlet. Wait for approximately 30 seconds
leaving the projector unplugged, and then plug it back in and turn on the
projector. The projector displays the Password entry screen again so that you
can enter the correct Password.
If you have forgotten the password, make a note of the "Request Code: xxxxx"
number that appears on the screen and contact the nearest address provided in
the Support and Service Guide.
s
Epson Projector Contact List
If you continue to repeat the above operation and input the wrong Password
thirty times in succession, the following message is displayed and the projector
does not accept any more Password entries."The projector's operation will be
locked. Contact Epson as described in your documentation."
s
Epson
Projector Contact List
Restricting Operation (Control Panel Lock)
Perform one of the following to lock the operation buttons on the Control
panel.
Full Lock
All of the buttons on the Control panel are locked. You cannot perform
any operations from the Control panel, including turning the power on or
off.
Partial Lock
All of the buttons on the Control panel, except for the [
t] button, are
locked.
This is useful at events or shows when you want to deactivate all buttons
and only project, or at schools when you want to limit button operation.
The projector can still be operated using the Remote Control.
Procedure
A
During projection, press the [Menu] button and select Settings
- Control Panel Lock from the Configuration Menu.
s "Using
the Configuration Menu" p.48
Using the Remote Control Using the Control panel
B
Select either "Full Lock" or "Partial Lock".
C
Select Yes when the confirmation message is displayed.
The Control panel buttons are locked according to the setting you
chose.
Security Functions
39

Table of Contents

Other manuals for Epson EB-X9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-X9 and is the answer not in the manual?

Epson EB-X9 Specifications

General IconGeneral
Matrix size0.55 \
Projection distance1.8 - 2.4 m
Projection technologyLCD
Contrast ratio (typical)2000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, vertical30 °
Audio input1 x RCA
Aspect ratio4:3
RS-232 ports0
Dimensions (WxDxH)295 x 228 x 77 mm
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
Analog signal format system-
RMS rated power1 W
Number of built-in speakers1
DVI portNo
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)0.4 W
Power consumption (typical)265 W
Noise level37 dB
Country of originChina
Pallet width800 mm
Pallet height2230 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Weight2300 g
Package depth360 mm
Package width340 mm
Package height160 mm
Package weight4060 g

Related product manuals