EasyManuals Logo

Epson EB-X9 User Manual

Epson EB-X9
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Problems relating to projection
The projector does not turn on
Check Remedy
Did you press the [t] button? Press the [t] button to turn the power on.
Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally.
Disconnect and then reconnect the power cable. s Quick Start Guide
Check that your electrical outlet or power source is functioning correctly.
Do the indicators turn on and off when the power cable is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List
Is the Control Panel Lock set to Full Lock? Press the [t] button on the Remote Control. If you do not want to use Control Panel Lock, change the setting to Off.
s Settings Menu - Control Panel Lock p.39
No images appear
Check Remedy
Did you press the [t] button? Press the [t] button to turn the power on.
Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally.
Connect the projector's power cable correctly. s Quick Start Guide
Check that your electrical outlet or power source is functioning correctly.
Is A/V Mute active? Press the [A/V Mute] button on the Remote Control to cancel A/V Mute. s p.25
Is the A/V mute slide closed? Open the A/V mute slide.
s
p.9
Are the Configuration Menu settings correct? Reset all of the settings. s Reset Menu - Reset All p.56
Is the projected image completely black?
Only when projecting computer images
Some input images, such as screen savers, may be completely black.
Is the image signal format setting correct?
Only when projecting images from a video source
Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.50
Problem Solving
63

Table of Contents

Other manuals for Epson EB-X9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-X9 and is the answer not in the manual?

Epson EB-X9 Specifications

General IconGeneral
Matrix size0.55 \
Projection distance1.8 - 2.4 m
Projection technologyLCD
Contrast ratio (typical)2000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, vertical30 °
Audio input1 x RCA
Aspect ratio4:3
RS-232 ports0
Dimensions (WxDxH)295 x 228 x 77 mm
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
Analog signal format system-
RMS rated power1 W
Number of built-in speakers1
DVI portNo
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)0.4 W
Power consumption (typical)265 W
Noise level37 dB
Country of originChina
Pallet width800 mm
Pallet height2230 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Weight2300 g
Package depth360 mm
Package width340 mm
Package height160 mm
Package weight4060 g

Related product manuals