64
You see this screen:
3. Select Paper Source Settings and press the OK button.
Note: To turn off automatic display of the paper settings screen after you load paper in the product,
set the Paper Configuration setting to Off. If you do this, you will not be able to use AirPrint.
4. Select Paper Setup and press the OK button.
5. Select Paper Size and press the OK button.
6. Select the paper size you loaded and press the OK button.
7. Select Paper Type and press the OK button.
8. Select the paper type you loaded and press the OK button.
Paper or Media Type Settings - Control Panel
Parent topic: Loading Paper
Related references
Paper or Media Type Settings - Printing Software
To Next Page
Loading...
