Epson EC-C110 - Selecting Wireless Network Settings from the Control Panel

43
Selecting Wireless Network Settings from the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions in the Quick Guide and install the
necessary software. The installer program guides you through network setup.
1. From the home screen, select Wi-Fi Setup and press the OK button.
You see this screen:
2. Select Wi-Fi (Recommended) and press the OK button twice.
3. Select Wi-Fi Setup Wizard and press the OK button.
4. Do one of the following:
• Press the OK button to select the wireless network displayed.
• Press the arrow buttons to select the name of your wireless network and press the OK button. If
you do not see your wireless network's name, you can enter it manually.
Note: To enter the wireless network name manually, select Other SSID and press the OK button.
Enter your network name as described in the next step.