63
Note: Make sure the paper fits under the tab on the edge guide. If you cannot move the edge guide,
make sure the guide on the right is in the correct position as shown. Slide the edge guide all the way
left and the guide on the right all the way right. Then load paper again.
5. Select the size and type of paper you loaded on the product LCD screen.
Always follow these paper loading guidelines:
• Load only the recommended number of sheets.
• Load paper short edge first and printable side faceup.
• If you have trouble loading an envelope, press it envelope flat before loading it.
• Check the paper package for any additional loading instructions.
Parent topic: Loading Paper
Related references
Paper Loading Capacity
Paper Specifications
Selecting the Paper Source Settings - Control Panel
You can change the default paper size and paper type using the control panel on the product.
1. From the home screen, select Menu and press the OK button.
2. Press the arrow buttons to select Printer Setup and press the OK button.
To Next Page
Loading...
Need help?
General