Setting Image Quality
46
Super-resolution
This function is only available for EH-LS9600W.
This setting sharpens blurred images, enhancing the apparent detail of the image by increasing the resolution
of the image signal.
a
Press the button.
c
•
You can make settings from the
Configuration menu.
s Signal -
Super-resolution p.88
•
This cannot be set when a
computer image signal is being
input.
•
This cannot be set when
converting 2D images to 3D
images.
s Signal - 3D Setup -
2D-to-3D Conversion p.88
•
When projecting 3D images, this
setting is enabled only for 1080p/
24 Hz/frame packing signals.
b
Use the buttons to make
adjustments.
The higher the number, the stronger the
effect.
Press the button to return the
adjustments to their default values.
c
Depending on the image,
distortion at the edge of the image
may be enhanced. If you notice
any distortion, set it to "0".
c
Press the button to exit the
menu.
Super-resolution/4K Enhancement
This function is only available for EH-LS10000.
There are two types of setting available, Super-resolution and 4K Enhancement.
When a low resolution image is input to the projector, it is increased to 1920 x 1080 pixels. Super-
resolution sharpens blurred images, enhancing the apparent detail of the image by increasing the resolution
of the image signal.
4K Enhancement projects 4K images (3840 x 2160 pixels) using "4K Enhancement Technology", employing
super resolution processing and creating ultra high definition images.
To Next Page
Loading...
