Epson EH-LS10000 - Wirelesshd Transmission Range

Useful Functions
74
Function Explanation
Reset
Resets WirelessHD settings to their default settings.
c
Even when the WirelessHD Transmitter and the projector are connected, 0% is displayed as the
Reception when no image signal is being input. Check the communication status using the Link
indicator.
s p.68
WirelessHD Transmission Range
The following shows the WirelessHD transmission range. Make sure the front of the WirelessHD
Transmitter faces the front of the projector.
Horizontal direction (when WiHD Mode is set to Full)
Vertical direction (placed on a shelf)
Horizontal direction (when WiHD Mode is set to Dy-
namic)
Vertical direction (suspended from a ceiling)