Useful Functions
78
Displaying as a Sub-Screen
a
Point the remote control at the
WirelessHD Transmitter, and then
press the
button.
Displays the sub-screen (small screen) for
the connected device.
b
When switching between the sub-
screen and the main screen (large
screen), press and hold down the
button (for approximately
3 seconds) until the screen changes.
c
To close the sub-screen, press the
button again.
The projected image is switched.
c
•
When the sub-screen is displayed,
press the
button to
switch the image for the sub-
screen.
•
When the sub-screen is displayed,
press the
button to
change the position and size
(large or small) of the sub-screen.
Each time the
button is
pressed, the display position
moves from bottom right, top
right, top left, and bottom left
allowing you to change the size.
To Next Page
Loading...
