Setting Image Quality
58
Image Processing
Improves the image quality or response speed for projected images.
This is only available when receiving a progressive signal input from the Component, Video, HDMI1, or
HDMI2 ports, or from WirelessHD.
a
Press the button, select Signal -
Advanced - Image Processing from
the Configuration menu, and then
press the
button to confirm the
selection.
The Image Processing adjustment screen
is displayed.
b
Use the buttons to
select the item, and then press the
button to confirm the selection.
Fine: Improves the image quality.
Fast: Improves the response speed.
c
Press the button to exit the
menu.
c
•
In the following situations, this is fixed at Fine and grayed out.
- When a 3D image is being input
- When a 4K image signal is being input
•
When Image Processing is set to Fast, the following settings are applied and menu items are grayed
out.
- Noise Reduction, Frame Interpolation, 2D-to-3D Conversion: Fixed at Off
- Sharpness - Advanced, Super-resolution/4K - 4K: Unavailable
•
When Super-resolution/4K is set to 4K, and Image Processing is set to Fast, a message is displayed
informing you that 4K Enhancement has been cancelled. Select Yes, and set Super-resolution/4K to
Off. If you select No, the screen displayed in step 2 is displayed again.
•
When a signal is being input with a refresh rate of 24 Hz or 30 Hz, the Fine setting is used.
To Next Page
Loading...
