Useful Functions
76
c
Point the remote control at the WirelessHD Transmitter, and then press the button.
Remote control WirelessHD Transmit-
ter
Depending on the output target, the WiHD indicator on the WirelessHD Transmitter indicates the
following status.
On: The image is being output to the projector.
Off: The image is being output to the monitor device.
The output target projected last time is projected the next time the projector is turned on.
c
You can switch to the monitor device even when the projector is off.
Switching the image source
You can switch the image source for the AV device connected to the WirelessHD Transmitter. When switching,
each input source is displayed on one screen as a preview. This allows you to switch easily between image
sources even when two or more devices are connected using HDMI.
The projector uses InstaPrevue Technology from Silicon Image, Inc.
To Next Page
Loading...
