EasyManuals Logo

Epson EH-TW650 User Manual

Epson EH-TW650
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
Solving Image or Sound Problems
134
enabled and extended desktop mode is disabled. (See your computer or
Windows manual for instructions.)
d
If necessary, check your video card settings and set the multiple display
option to Clone or Mirror.
Displaying From a Mac Laptop
If the message "No Signal" is displayed when projecting from a Mac laptop,
you need to set up the laptop for mirrored display. (See your laptop manual
for details.)
a
Open the System Preferences utility and select Displays.
b
Select the Display or Color LCD option, if necessary.
c
Click the Arrange or Arrangement tab.
d
Select Mirror Displays.
Solutions When "Not Supported" Message Appears
If the message "Not supported" is displayed, try the following solutions:
Make sure the correct input signal is selected in the projector's Signal menu.
Make sure the computer's display resolution does not exceed the projector's
resolution and frequency limits. If necessary, select a different display
resolution for your computer. (See your computer manual for details.)
gg Related Links
"Input Signal Settings - Signal Menu" p.96
"Supported Monitor Display Resolutions" p.146
Solutions When Only a Partial Image Appears
If only a partial computer image appears, try the following solutions:
Press the [Auto] button on the remote control to optimize the image signal.
Try adjusting the image position using the Position setting in the
projector's Signal menu.
Press the [Aspect] button on the remote control to select a different image
aspect ratio.
Change the Resolution setting in the projector's Signal menu according to
the signal for the connected equipment.
If you zoomed into or out of the image using the [E-Zoom] buttons, press
the [Esc] button until the projector returns to a full display.
Check your computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual for
details.)
Check the resolution assigned to your presentation files to see if they are
created for a different resolution. (See your software help for details.)
Make sure you selected the correct projection mode. You can select this
using the Projection setting in the projector's Extended menu.
gg Related Links
"Input Signal Settings - Signal Menu" p.96
"Projector Setup Settings - Extended Menu" p.100
"Supported Monitor Display Resolutions" p.146
Solutions When the Image is not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
Place the projector directly in front of the center of the screen, facing it
squarely, if possible.
Turn on automatic adjustment in the projector's Settings menu. The
projector automatically corrects the image every time you move the
projector.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW650 and is the answer not in the manual?

Epson EH-TW650 Specifications

General IconGeneral
Matrix size0.61 \
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance1.35 - 1.64 m
Vertical scan range192 - 240 Hz
Projection technology3LCD
Contrast ratio (typical)15000:1
Screen size compatibility30 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)1925 ANSI lumens
FocusManual
Throw ratio1.02 - 1.23:1
Focal length range18.2 - 29.2 mm
Aperture range (F-F)1.58 - 1.7
Lamp typeUHE
Lamp power210 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4500 h
Service life of light source (economic mode)7500 h
3DNo
Full HDYes
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
Component video (YPbPr/YCbCr) in-
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)28 dB
Cables includedAC
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.2 W
Power consumption (typical)298 W
Power consumption (economy mode)219 W
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Cable lock slot typeKensington
RMS rated power2 W
Pallet width800 mm
Pallet height2204 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth252 mm
Width302 mm
Height92 mm
Weight2700 g
Package depth380 mm
Package width355 mm
Package height160 mm
Package weight3560 g

Related product manuals