Epson L5590 Series User Manual

& “Setting a Static IP Address for the Printer” on page 134
Message on the Network Environment
Message Solution
The Wi-Fi environment needs to be
improved. Turn the wireless router o and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
After moving the printer closer to the wireless router and removing any
obstacles between them, turn o the wireless router. Wait for about 10
seconds, and then turn it on. If it still does not connect, see the
documentation supplied with the wireless router.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
Computer and smart devices that can be connected simultaneously are
connected in full in the Wi-Fi Direct (Simple AP) connection. To add another
computer or smart device, disconnect one of the connected devices or
connect it to the other network
rst.
You can conrm the number of wireless devices which can be connected
simultaneously and the number of connected devices by checking the
network status sheet or the printer’s control panel.
The same SSID as Wi-Fi Direct exists in the
environment. Change the Wi-Fi Direct SSID
if you cannot connect a smart device to the
printer.
On the printer’s control panel, go to Wi-Fi Direct Setup screen and select the
menu to change the setting. You can change the network name following
after DIRECT-XX-. Enter within 22 characters.
Connecting a Smart Device and Printer Directly (Wi-Fi
Direct)
Wi-Fi Direct (Simple AP) allows you to connect a smart device directly to the printer without a wireless router and
print from the smart device.
About Wi-Fi Direct
Use this connection method when you are not using Wi-Fi at home or at the oce, or when you want to connect
the printer and the computer or smart device directly. In this mode, the printer acts as an wireless router and you
can connect the devices to the printer without having to use a standard wireless router. However, devices directly
connected to the printer cannot communicate with each other through the printer.
In These Situations > Connecting a Smart Device and Printer Directly (Wi-Fi Direct) > About Wi-Fi Direct
128

Epson L5590 Series Specifications

General

Scan Resolution	1200 x 2400 dpi
Fax	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Ink Tank System	Yes
Functions	Print, copy, scan, fax
Print Resolution	5760 x 1440 dpi
Duplex Printing	Yes
Scanner Type	Flatbed
Mobile Printing	Epson iPrint, Email Print, Apple AirPrint
Paper Handling Input	250 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Display	2.4-inch color LCD
Ink Colors	Black, Cyan, Magenta, Yellow
Print Speed (Black)	Up to 33 ppm (draft), Up to 15 ipm (ISO)