Epson L5590 Series User Manual

The copy density setting is too high.
Solutions
Lower the copy density setting.
& “More Menu Options for Copying” on page 64
The Text or Image Copied from the ADF is Squeezed or Stretched
Some originals may not be scanned properly from the ADF.
Solutions
Place originals on the scanner glass.
& “Placing Originals on the Scanner Glass” on page 37
Scanned Image Problems
Uneven Colors, Dirt, Spots, and so on Appear when Scanning from the Scanner
Glass
There is dust or dirt on the originals or the scanner glass.
Solutions
Remove any dust or dirt that adheres to the originals, and clean the scanner glass.
& “Cleaning the Scanner Glass” on page 108
The original was pressed with too much force.
Solutions
If you press with too much force, blurring, smudges, and spots may occur.
Do not press with too much force on the original or the document cover.
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Scanned Image Problems
173

Epson L5590 Series Specifications

General

Scan Resolution	1200 x 2400 dpi
Fax	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Ink Tank System	Yes
Functions	Print, copy, scan, fax
Print Resolution	5760 x 1440 dpi
Duplex Printing	Yes
Scanner Type	Flatbed
Mobile Printing	Epson iPrint, Email Print, Apple AirPrint
Paper Handling Input	250 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Display	2.4-inch color LCD
Ink Colors	Black, Cyan, Magenta, Yellow
Print Speed (Black)	Up to 33 ppm (draft), Up to 15 ipm (ISO)