Epson L5590 Series User Manual

The original was pressed with too much force.
Solutions
If you press with too much force, blurring, smudges, and spots may occur.
Do not press with too much force on the original or the document cover.
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “More Menu Options for Copying” on page 64
Moiré (Cross-Hatch) Patterns Appear in the Copied Image
If the original is a printed document such as a magazine or a catalog, a dotted moiré pattern
appears.
Solutions
Change the reduce and enlarge setting. If a moiré pattern still appears, place the original at a slightly
dierent angle.
& “More Menu Options for Copying” on page 64
An Image of the Reverse Side of the Original Appears in the Copied Image
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals on the Scanner Glass” on page 37
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Copy Quality is Poor
172

Epson L5590 Series Specifications

General

Scan Resolution	1200 x 2400 dpi
Fax	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Ink Tank System	Yes
Functions	Print, copy, scan, fax
Print Resolution	5760 x 1440 dpi
Duplex Printing	Yes
Scanner Type	Flatbed
Mobile Printing	Epson iPrint, Email Print, Apple AirPrint
Paper Handling Input	250 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Display	2.4-inch color LCD
Ink Colors	Black, Cyan, Magenta, Yellow
Print Speed (Black)	Up to 33 ppm (draft), Up to 15 ipm (ISO)