Epson L5590 Series User Manual

An Image of the Reverse Side of the Original Appears in the Sent Fax
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals on the Scanner Glass” on page 37
The density setting is high when sending faxes.
Solutions
Select Fax > Menu > Scan Settings > Density, and then lower the setting.
Received Fax Quality is Poor
The Image Quality of Received Faxes is Poor
Solutions
e following causes can be considered.
ECM setting is disabled.
Solutions
Select Settings > Fax Settings > Basic Settings and enable the ECM setting on the printer's control panel.
is may clear errors that occur due to connection problems. Note that the speed of sending and
receiving faxes may be slower than when ECM is disabled.
The image quality setting is low on the sender's fax machine.
Solutions
Ask the sender to send faxes at a higher quality.
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > The Quality of the Sent Fax is Poor
178

Epson L5590 Series Specifications

General

Scan Resolution	1200 x 2400 dpi
Fax	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Ink Tank System	Yes
Functions	Print, copy, scan, fax
Print Resolution	5760 x 1440 dpi
Duplex Printing	Yes
Scanner Type	Flatbed
Mobile Printing	Epson iPrint, Email Print, Apple AirPrint
Paper Handling Input	250 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Display	2.4-inch color LCD
Ink Colors	Black, Cyan, Magenta, Yellow
Print Speed (Black)	Up to 33 ppm (draft), Up to 15 ipm (ISO)