Add Reception Information:
Prints reception information on the received fax, even if the sender does not set the header
information. e reception information includes the received date and time, sender's ID, and page
number (such as "P1"). When Split Page Settings is enabled, the split page number is also included.
Print Start Timing:
Select options to start printing the faxes to receive.
❏ All Pages Received: Printing starts aer receiving all of the pages. To start printing from the rst
page or last page depends on the setting of Collation Stack feature. See the explanation for
Collation Stack.
❏ First Page Received: Starts printing when the rst page is received, and then prints in order as the
pages are received. If the printer cannot start printing, such as when it is printing other jobs, the
printer starts printing received pages as a batch when it is available.
Collation Stack:
Since the rst page is printed last (output to the top), the printed documents are stacked in the correct
page order. When the printer is running low on memory, this feature may not be available.
Print Suspend Time:
During the time period you specied from Stop through Restart you specied, the printer saves
documents received in the printer's memory without printing them. is feature can be used for
noise prevention at night or to prevent condential documents from being disclosed while you are
away. Before using this feature, make sure there is enough free memory. When you set this to O, you
can print the received documents even before the restart time.
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings Menu
You can nd the menu on the printer's control panel below:
Settings > Fax Settings > Report Settings
Fax Log Auto Print:
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are
completed. Select On(Time) to print the log at a
specied
time. However, if the number of fax jobs
exceeds 30, the log is printed before the specied time.
Attach Fax image to report:
Prints a Transmission Report with an image of the rst page of the sent document. Select On(Large
Image) to print the upper part of the page without reducing. Select On(Small Image) to print the
entire page reducing it to t onto the report.
Report Format:
Selects a format for fax reports in Fax > Menu > More > Fax Report other than Protocol Trace.
Select Detail to print with error codes.
Product Information
>
Settings Menu List
>
Fax Settings
221
To Next Page
Loading...
Need help?
General
