Epson L565 - The ADF Does Not Work; The Date and Time Are Incorrect; Application Is Blocked by a Firewall (for Windows Only); A Message Prompting You to Reset the Ink Levels Is Displayed

The ADF Does Not Work
ere may be dust in the hole at the front-le of the scanner glass. Clean out any dust.
The Date and Time Are Incorrect
Set the date and the time correctly on the control panel.
Aer
a power failure caused by a lightning strike or if the
power is le o for a long time, the clock may show the wrong time.
Related Information
&
“Setup Mode” on page 18
Application Is Blocked by a Firewall (for Windows Only)
Add the application to the Windows Firewall allowed program in security settings on the Control Panel.
A Message Prompting You to Reset the Ink Levels is Displayed
Rell
all or the
specied
ink tanks, select the color that you
relled
on the LCD screen, and then press the
x
button to reset the ink levels.
Depending on the usage conditions, the message may be displayed when there is still ink in the tank.
Related Information
& “Relling the Ink Tanks” on page 77
User's Guide
Solving Problems
119