Epson L565 - Selecting Default Print Settings - Windows

Ink Bottle Codes
Epson recommends the use of genuine Epson ink bottles. Epson cannot guarantee the quality or reliability of non-
genuine ink. e use of non-genuine ink may cause damage that is not covered by Epson's warranties, and under
certain circumstances, may cause erratic printer behavior.
Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior.
e following are the codes for genuine Epson ink bottles.
BK (Black) C (Cyan) M (Magenta) Y (Yellow)
664 664 664 664
c
Important:
Use of genuine Epson ink other than
specied
could cause damage that is not covered by Epson's warranties.
Note:
For European users, visit the following website for information on Epson's ink bottle yields.
http://www.epson.eu/pageyield
Ink Bottle Handling Precautions
Read the following instructions before relling ink.
Handling precautions
❏ Use ink bottles with the correct part code for this printer.
❏ is printer requires careful handling of ink. Ink may splatter when the ink tanks are lled or relled with ink.
If ink gets on your clothes or belongings, it may not come o.
❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Store the ink bottles in the same environment as the printer.
❏ When storing or transporting an ink bottle
aer
removing its seal, do not tilt the bottle and do not subject it to
impacts or temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely.
Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking
when you transport the bottle.
❏ Aer bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Do not open the ink bottle package until you are ready to
ll
the ink tank.
e
ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ Do not continue printing when the ink level is below the lower line on the ink tank. Continued use of the
printer when the ink level is below the lower line could damage the printer. Epson recommends lling all ink
tanks to the upper line when the printer is not operating to reset the ink levels.
User's Guide
Relling Ink
76