Note:
You can use pre-punched paper under the following conditions.
❏ Loading capacity: One sheet
❏ Available size: A4, B5, A5, A6, Letter, Legal
❏ Binding holes: Do not load paper with the binding holes at the top or the bottom.
Adjust the print position of your le to avoid printing over the holes.
4. Slide the edge guide to the edge of the paper, and then close the feeder guard.
5. On the control panel, set the size and type of the paper you loaded in the rear paper feed.
Note:
You can also display the paper size and paper type settings screen by selecting Setup > Paper Setup.
6. Slide out the output tray.
Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Related Information
& “Paper Handling Precautions” on page 23
User's Guide
Loading Paper
27
To Next Page
Loading...
