E
E ppssoon n EE TT--44555500, , LL665555//665566 RReevviissiioon n BB
2.3.2 2.3.2 Disassembly Disassembly FlowchartFlowchart
This section describes procedures for disassembling the parts/units in a flowchart format. For some parts/units,This section describes procedures for disassembling the parts/units in a flowchart format. For some parts/units,
detailed procedures or precautions are provided (accordingly indicated by icons and cell's detailed procedures or precautions are provided (accordingly indicated by icons and cell's color). Refer to thecolor). Refer to the
explanations in the example chart below and explanations in the example chart below and perform an appropriate disassembling and assembling procedure.perform an appropriate disassembling and assembling procedure.
(See(See "2.4 Detailed Disassembly/Reassembly Procedure for each Part/Unit (p45)"
"2.4 Detailed Disassembly/Reassembly Procedure for each Part/Unit (p45)".).)
For routing cables, seeFor routing cables, see "2.5 Routing FFCs/cables (p51)"
"2.5 Routing FFCs/cables (p51)"..
The example below shows how to see The example below shows how to see the charts on the following pages.the charts on the following pages.
Printer
Printer
MechanismMechanism
11
44
(p 22)
(p 22) (p 43)(p 43)
S2S2
Main Frame AssyMain Frame Assy
------
------
(p 21)
(p 21) (p 27)(p 27)
Paper GuidePaper Guide
Upper Assy (p29)Upper Assy (p29)
CR Timing BeltCR Timing Belt
FFC/CableFFC/Cable * 1
* 1
NoteNote "*":"*": The boxes with only The boxes with only part names indicates the part names indicates the removal of such parts. If removal of such parts. If the names of FFCs the names of FFCs or cables areor cables are
shown, disconnect the FFCs or cables from their connectors.shown, disconnect the FFCs or cables from their connectors.
Black letters indicate aBlack letters indicate a
part/unit not supplied aspart/unit not supplied as
an ASP.an ASP.
The name enclosed in grayThe name enclosed in gray
indicate a part/unit thatindicate a part/unit that
must be removed on themust be removed on the
way to the target parts.way to the target parts.
Shows necessaryShows necessary
procedures beforeprocedures before
removing the followingremoving the following
parts.*parts.*
Shows the procedureShows the procedure
number on the “FFC/number on the “FFC/
cable list”.cable list”.
White letters indicate aWhite letters indicate a
part/unit supplied aspart/unit supplied as
an ASP.an ASP.
Shows the screw typesShows the screw types
and the specifiedand the specified
torque in the “Screwtorque in the “Screw
type/torque list”.type/torque list”.
Shows removal/installationShows removal/installation
as a unit/assy. is available.as a unit/assy. is available.
Reference pageReference page
To Next Page
Loading...
