Epson L655 - Required Adjustments

To Next Page

To Previous Page



Adjus

Adjusttmmeentnt RReeqquiruireed d AdjusAdjusttmmeentntss 5555

EE ppssoon n EE TT--44555500, , LL665555//665566 RReevviissiioon n BB

ConfidentialConfidential

3.13.1 ReReququirired ed AdjAdjusustmtmenentsts

The table from the following page The table from the following page lists the required adjustments depending upon the parts lists the required adjustments depending upon the parts being repaired orbeing repaired or

replaced. Find the part(s) you removed or replaced, and replaced. Find the part(s) you removed or replaced, and check which adjustment(s) must be carried out.check which adjustment(s) must be carried out.

 When performing the adjustment with printing When performing the adjustment with printing and feeding papers, conformand feeding papers, conform

information of paper in the printer to the size and type of paper set in the information of paper in the printer to the size and type of paper set in the cassette.cassette.

 After all required adjustments are completed, use the “Final After all required adjustments are completed, use the “Final check pattern print”check pattern print”

function to print all adjustment patterns for final function to print all adjustment patterns for final check. If you find a check. If you find a problem with theproblem with the

printout patterns, carry out the printout patterns, carry out the adjustment again.adjustment again.

 When replacing the Main Board and the When replacing the Main Board and the Printer Mechanism at the same time, Printer Mechanism at the same time, thethe

adjustment should be made after performing the initial setting.adjustment should be made after performing the initial setting.



The table items and marks used in The table items and marks used in the “Required Adjustment List” provided on thethe “Required Adjustment List” provided on the

following pages have the following pages have the following meanings.following meanings.

•• “---” “---” indiindicates cates that that the athe adjusdjustmentment is nt is not reqot requireduired..

•• The “MecThe “Mechanihanism Adjsm Adjustmustment” shent” should be peould be performrformed just afed just after reinter reinstallstalling oring or

reassembling the part or unit.reassembling the part or unit.

•• The “AdThe “Adjustjustmentments using ths using the Adjuse Adjustmentment Prograt Program” need to be pem” need to be performrformed aftered after

reassembling the printer completely.reassembling the printer completely.

 If you have removed or If you have removed or replaced multiple parts, make sure to replaced multiple parts, make sure to check the requiredcheck the required

adjustments for the all parts. And when multiple adjustments must be carried out, adjustments for the all parts. And when multiple adjustments must be carried out, bebe