E
E ppssoon n EE TT--44555500, , LL665555//665566 RReevviissiioon n BB
4.2 Lubrication4.2 Lubrication
The type and amount of the grease used to lubricate the printer parts are determined based on the results of theThe type and amount of the grease used to lubricate the printer parts are determined based on the results of the
internal evaluations. Therefore, refer tointernal evaluations. Therefore, refer to "4.3 Lubrication Points and Instructions (p70)"
"4.3 Lubrication Points and Instructions (p70)"for the repairingfor the repairing
procedures below, and appprocedures below, and apply the specified type and amounly the specified type and amount of the grease to the specified part of the grease to the specified part of the printert of the printer
mechanism.mechanism.
"4.3 Lubrication Points and Instructions (p70)""4.3 Lubrication Points and Instructions (p70)"also provides information about whether or also provides information about whether or not the parts whichnot the parts which
require lubrication are supplied as ASP and the lubrication status when supplied as ASP. For the parts which arerequire lubrication are supplied as ASP and the lubrication status when supplied as ASP. For the parts which are
not supplied as ASP, if not supplied as ASP, if their movement is not smooth enough, check their lubrication sttheir movement is not smooth enough, check their lubrication status and lubricate them ifatus and lubricate them if
necessary.necessary.
GreaseGrease
ToolsTools
T
Tyyppee NNaammee EEPPSSOON N PPaarrt t CCooddee SSuupppplliieerr
GGrreeaassee GG--4455 11003333665577 EEPPSSOONN
GGrreeaassee GG--7711 11448800665555 EEPPSSOONN
GGrreeaassee GG--7722 11440099225588 EEPPSSOONN
GGrreeaassee GG--9966 11559900770000 EEPPSSOONN
N
Naammee AAvvaaiillaabbiilliittyy EEPPSSOON N PPaarrt t CCooddee
IInnjjeeccttoorr O O ** ------
BBrruusshh O O ** ------
FFlluux x ddiissppeennsseerr O O ** ------