1
Setting Up the Printer
1-7
R4C3730
Rev. C
A5 size CHAP1.FM
8/23/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
4. Make sure that the print head is not hot; if it is, let it cool for
a few minutes before touching it. Then slide the print head to
the ribbon installation position (the indented portion of the
paper tension unit) by hand.
Note:
When the pull tractor is installed, you can replace the ribbon
cartridge when the print head is not in the ribbon installation
position.
5. If a used cartridge is installed, grasp the cartridge and pull it
slightly forward and up; the ribbon guide snaps away from
the metal pins behind the print head. Properly dispose of the
used ribbon cartridge.
ribbon guide
1-2.eps
1-3-1.eps
To Next Page
Loading...
