1
Setting Up the Printer
1-9
R4C3730
Rev. C
A5 size CHAP1.FM
8/23/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
8. Make sure that the two rear notches of the cartridge fit over
the small pegs on each side of the printer. Then gently press
down the cartridge until both ends click into place.
9. Lift the cartridge’s ribbon guide (①) and insert it firmly over
the metal pins behind the print head (②). Make sure the
ribbon is not twisted or creased and that it is in place behind
the print head. Then press down the guide until it clicks into
place.
ribbon guide
ribbon-tightening
knob
1-5a.eps
1-5b.eps
To Next Page
Loading...
