Getting to Know Your Printer
3
❏
Use the
paper release lever
to change the paper path without
removing continuous paper from the push tractor.
When using the paper release lever, you can easily switch to
printing on single sheets without removing the continuous
paper loaded in the push tractor. For more information, see
Chapter 2.
❏
Use the
micro adjust feature
to adjust the top-of-form and
tear-off positions. (See the Glossary for explanations of the
top-of-form and tear-off positions.)
The micro adjust feature allows you to move the paper
forward or backward in 1/180-inch increments so that you can
make precise adjustments to the top-of-form and tear-off
positions. For more information, see Chapter 2.
paper release lever
To Next Page
Loading...
