A-16
Enhancing Your Printer With Options
Assembling the double-bin cut-sheet feeder
Using the double-bin cut-sheet feeder allows you to load two
different types of paper automatically. Before you install the
double-bin cut-sheet feeder, you need to connect the single-bin
cut-sheet feeder (C80637
✽
) to the high-capacity cut-sheet feeder
(C80638
✽
).
1. Remove the gear cover from the back of the high-capacity cut-
sheet feeder by pressing down the tab and pulling the cover
backward. Store it in a safe place.
2. Hold the single-bin cut-sheet feeder in both hands. Fit the
notches in the single-bin cut-sheet feeder over the mounting
posts on the back of the high-capacity cut-sheet feeder.
To Next Page
Loading...
