A-20
Enhancing Your Printer With Options
Using the Roll Paper Holder
The optional roll paper holder (#8310) allows you to use 8.5-inch
roll paper like that used with telex machines. This provides an
inexpensive alternative to using continuous paper for
applications that require variable paper lengths. Before you install
and use the roll paper holder, you need to assemble it.
Assembling the roll paper holder
To assemble the roll paper holder, follow the steps below.
1. Fit the arc bearings into the stand as shown.
2. Make sure you orient the stand and base plate as shown
below. Then place the base plate on the stand and fasten the
two together with the plastic spacing clips.
To Next Page
Loading...
