A
Enhancing Your Printer With Options
A-7
2. Holding the cut-sheet feeder in both hands, press down on
the latch levers and fit the notches over the printer’s mounting
posts, as shown below. Release the latch levers to lock the
feeder in place.
Note:
To use both cut-sheet feeders together as a double-bin cut-sheet feeder,
you need to install the single-bin cut-sheet feeder behind the high-
capacity cut-sheet feeder. For installation details see “Assembling the
double-bin cut-sheet feeder” on page A-16.
single-bin cut-sheet feeder
high-capacity cut-sheet feeder / double-bin cut-sheet feeder
To Next Page
Loading...
