2
Printing on Continuous Paper
2-3
The table below describes each paper release lever position.
Paper release
lever position
Description
Single-sheet position
For loading single-sheet paper from the top or front
slot. For information on loading single sheets, see
Chapter 3.
Push tractor position
For loading continuous paper from the tractor
installed in the push position. Also set the lever to this
position when using the push and pull tractor in
combination.
Pull tractor position
For loading continuous paper from the tractor
installed on top of the printer in the pull position.
When the tractor is in the pull position, you can load
paper in the front, rear, or bottom slot.
To Next Page
Loading...
