❏ When using labels whose backing sheet is entirely covered, make sure the cuts around the
edges of the labels are perforated.
1. backing sheet
2. label sheet
3. several uncut areas on each side
4. label
Backing sheet width
single sheets
multipart forms
100 to 210 mm (3.9 to 8.3 inches)
101.6 to 304.8 mm (4.0 to 12.0 inches)
Labels
Width
Height
Corner radius
Weig ht
63.5 mm (2.5 inches), minimum
23.8 mm (0.94 inch), minimum
2.5 mm (0.1 inch), minimum
64 g/m² (17 lb)
Thickness
Backing sheet
Tota l
0.07 to 0.09 mm (0.0027 to 0.0035 inch)
0.16 to 0.19 mm (0.0063 to 0.0075 inch)
Quality Plain paper or the same quality labels with
continuous backing sheet
Envelopes
Size No. 6
165 × 92 mm (6.5 × 3.6 inches)
LQ-690II/LQ-690IIN User’s Guide
Product Information 119
To Next Page
Loading...
