139
Continuous paper (standard and multipart):
rear and bottom entry
Labels: bottom entry
Roll paper: rear entry with optional roll paper holder
Width 101.6 to 406.4 mm (4.0 to 16.0 inches)
Length (one page) 101.6 to 558.8 mm (4.0 to 22.0 inches)
Copies 1 original + up to 4 copies
Thickness 0.065 to 0.39 mm
(0.0025 to 0.015 inch)
Weight
(not multipart)
52 to 82 g/m² (14 to 22 lb)
Weight
(one sheet of multipart)
40 to 58 g/m² (12 to 15 lb)
Binding Spot glued or crimp bound on both
sides
Label size 23.8 × 63.5 mm (15/16 × 2.5 inches)
minimum
2.5 mm (0.1 inch) corner radius,
minimum
Backing sheet width 101.6 to 406.4 mm (4.0 to 16.0 inches)
Backing sheet length 101.6 to 558.8 mm (4.0 to 22.0 inches)
Backing sheet thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inch)
Total thickness 0.16 to 0.19 mm (0.0063 to 0.0075 inch)
Label weight 64 g/m² (17 lb)
Width 216 mm (8.5 inches)
Thickness 0.07 to 0.09 mm (0.0028 to 0.0035 inch)
Weight 52 to 82 g/m² (14 to 22 lb)
To Next Page
Loading...
Need help?
General
