5. Lower the ADF input tray.
6. Close the ADF cover until it clicks.
Preventing Paper Jams
Check the following if paper jams occur frequently.
❏ Place the printer on a at surface and operate in the recommended environmental conditions.
“Environmental Specications” on page 175
❏ Use the paper supported by this printer.
“Available Paper and Capacities” on page 157
❏ Follow paper handling precautions.
“Paper Handling Precautions” on page 26
❏ Load paper in the correct direction, and slide the edge guide against the edge of the paper.
“Loading Paper in the Rear Paper Feeder” on page 28
❏ Do not load more than the maximum number of sheets specied for paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
“List of Paper Type” on page 27
Solving Problems
>
Paper Gets Jammed
>
Preventing Paper Jams
139
To Next Page
Loading...
