6. While holding the ink bottle upright, turn the cap slowly to remove it.
c
Important:
❏ Epson recommends the use of genuine Epson ink bottles.
❏ Be careful not to spill any ink.
❏ Do not touch the top of the ink bottle aer removing the cap; otherwise you may be smeared with ink.
7. Check the upper line (a) in the ink tank.
8. Align the top of the ink bottle with the lling port, and then insert it straight into the port to ll ink until it
stops automatically at the upper line.
Ink starts pouring and the ow stops automatically when the ink reaches the upper line.
If the ink does not start
owing
into the tank, remove the ink bottle and reinsert it.
Solving Problems
>
It is Time to Rell the Ink
>
Relling the Ink Tanks
142
To Next Page
Loading...
Need help?
General