4. Put the used maintenance box in the transparent bag that came with the new maintenance box and seal the
bag shut.
5. Insert the new maintenance box all the way into the printer. Make sure you insert the box in the correct
direction.
6. Reattach the cover.
7. Check the message, and then press the OK button.
8.
Check the message, and then press the
x
button.
Related Information
& “Maintenance Box Handling Precautions” on page 145
Solving Problems
>
It is Time to Replace the Maintenance Box
>
Replacing a Maintenance Box
148
To Next Page
Loading...
Need help?
General