Epson p10000 - Page 141

141
Setting Options Description
Auto Nozzle Check Auto Cleaning
Setting
Periodically
Every Job
Off
Automatically runs a nozzle
check and cleans the print
head if necessary.
Periodically: checks the
nozzles occasionally.
Every Job: checks the
nozzles after every print job.
Note: Even if you select Off
as the Auto Cleaning
Setting option, the printer
runs an automatic nozzle
check (and may clean the
print head) when you switch
between black inks and after
initial ink charging.
Auto Clean Max
Repeat
1 to 3 Selects the number of
automatic print head
cleanings the printer performs
when clogged nozzles are
detected.
Auto Cleaning Option Continue
Pause
Selects what to do if the
nozzles are still closed after
the automatic head cleaning.
Store Held Job On
Off
When the internal print server
is installed, enables the
printer to skip any job that will
not print due to a paper size,
paper source, or output paper
size mismatch and save the
job on the server.
Calibration Setting On
Off
Lets you use the Epson Color
Calibration Utility.