31
Cut Sheet Handling
You can load a variety of types and sizes of cut sheet paper in your product.
Loading Cut Sheets
Loading Poster Board
Parent topic: Media Handling
Loading Cut Sheets
Always load cut sheet paper short edge first. You can load photo and fine art sheet paper 31 mil (0.8
mm) or thinner directly into the paper path.
Note: Remove and roll up any roll paper before you load cut sheet paper.
Caution: Do not use wavy or curled paper. Only use paper that is stored flat in its original package. If
you load wavy or curled paper, it may cause print head strikes that lead to repeated print head cleanings
or permanent damage to the printer.
1. Make sure the printer is turned on and the roll paper cover is closed.
2. Press the load/remove paper button.
3. Select Cut Sheet and press the OK button.
4. Feed the sheet into the feed slot until it meets resistance and the leading edge rests inside the feed
slot.
To Next Page
Loading...
